Difference Between Eavestrough and Gutter

man cleaning roof gutter or eavestrough

You must have heard the words eavestrough and gutter all this while but couldn’t figure out any differences yet? Well, the two terms have similar meaning and features. However, there are a couple differences which distinguishes them, and this article is all about that.


An eavestrough is a trough that drains water from the roof. The word eaves trough comes from eave and trough. So, basically, an eave is a portion of roof that is extended over to a wall, and develops a channel for rainwater drainage. The idea of modern eaves troughing is to collect rainwater from a building’s roof and dispense it to drainage systems through downspouts. The eaves trough cleaning process is adopted which discards all the rubbish and litter from the eaves and allows the water to flow smoothly. Thus, the cleaning process enables the eaves trough to perform their job properly and also protects the interior and exterior of the buildings from damage.



The gutters are basically elongated and narrow tubes that redirect the rain water. The gutters are installed at the front of a building where downspouts are also attached. The gutters and downspouts then provide a route to the water. From here, the gutter extension discharges the water to the ground and takes it away from the building’s roof and foundation. So, gutters stop the water from collecting into pools on the roof which could further result in water leakage. In simple words, the gutters provide an easy and free water flow, preventing it from causing any damage to the roof, walls and foundation of a building.


THE DIFFERENCE:             

The definitions seem quite similar, as the purpose of both an eaves trough and a gutter is to drain the water. But, there are a few differences between the two terms. Such as:


The most common and simplest difference between eavestrough and gutters is in the usage of these words in different regions of the world. The Canadian people mostly used the word roof eaves trough, while people in the US often use the term gutter. Both the words are used interchangeably around the world, as they serve a similar purpose. But, if the words are not used according to the locations, it can create confusion. Therefore, it is better to use the relevant terms according to the regions.


While both the terms are used synonymously implying the same meaning, the major difference between them is in the terms of the size. The eavestrough is installed on the eaves of a building that discharges the water to a downspout. Hence, an eavestrough prevents the rain water from causing damage to the walls, and it is used for an individual building only.


Whereas, the gutter is a broader term and it is referred to as a large system. The gutters join several buildings and provide them a connected system to drain the water collectively. Therefore, gutter cleaning is very important in order to control the rain water flow and any water damage. 

Leave a Reply

CommentLuv badge